Please Listen

All languages: post your test recording here. Help check audio files, provide editing services, and advertise for proof-listeners.
Post Reply
Posts: 2
Joined: February 25th, 2021, 1:27 am

Post by marawiii » March 2nd, 2021, 4:23 am

Posts: 11542
Joined: January 5th, 2012, 8:57 am

Post by wib66 » March 2nd, 2021, 5:37 am

Hi and welcome to Librivox. Your reading is great there are just some edits needed please.

The volume is 75dB which is too low. We aim for between 86-92 dB but ideally we would like it to be at 89 dB.
In Audacity you will also find the option to amplify under 'effects'.
How to amplify in Audacity:
If you like you can use the checker tool to verify volume and other settings.

Just for future reference -- actual recordings should begin with between 0.5-1 second of silence. At the end of the file there should be 5 seconds of silence.

Also adding in a plug in called replay gain will help you to check your volume in Audacity. The link for the video on how to do this is below.

If you are using Audacity, here is a video one of our volunteers made on how to set up your tech specs:

It would help if you could remove some of the background noise to do this carry out the following.

Step 1 - Select a piece of background noise
Select a piece of background noise (no speech, breaths or other noises) in your audio.
In Menu click: Effect > Noise Reduction... A dialog will pop up.
Click "Get Noise Profile" The dialog box will close instantly.

Step 2 - Noise Reduction
Press CTRL-A / Command-A to select your complete recording.
In Menu click: Effect > Noise Reduction... again. Note: don't select "Repeat Noise Reduction" -- that instantly applies the default settings; you want to adjust the settings and preview the results before you apply the noise filters.

Set Noise Reduction (dB) to 12
Set sensitivity to 6.00
Set frequency smoothing bands to 3
Choose Noise: Reduce
Click ok
This should solve the problem. Always make sure you listen to files through headphones so that you can notice any background noise that needs removing. I have tried this setting on your file and it works. It would be good for you to do this yourself so that you can hear the difference.

Please could you carry out the edits then upload the file using the same file name. If you need any more help please just ask. Thanks

Posts: 2
Joined: February 25th, 2021, 1:27 am

Post by marawiii » March 3rd, 2021, 5:47 am

thank you so much ill work on all of the notes :D

Post Reply